Chapter 2:Supplier List

10 Trash Bag Manufacturers in the USA for Reliable Supply

Michael VincentBy Michael VincentIndependent Consultant — Packaging Development and SourcingUpdated October 30, 202610 min read

For a facility, property-management, or procurement team, a trash bag is a consumable with a failure cost: a split liner turns into a custodial call, and a weak seal turns into odor.

US sourcing usually narrows to three routes — scale and private label (Poly-America, Inteplast, Berry), branded retail distribution (Reynolds, through Hefty), and a wide can-liner catalog with verifiable recycled or compostable content (Aluf, Novolex).

An ownership point is worth settling up front, because several supplier lists get it wrong: Hefty is a Reynolds Consumer Products brand, not a Poly-America product.

Poly-America makes Husky contractor bags and industrial film, and is a competitor in the same category. The comparison below fixes that attribution and marks which companies are built around can liners versus retail carrier bags.

Trash Bag Manufacturers In USA

How We Screened These Manufacturers?

Every company below cleared the same five checks before it made the list:

  • Can liners or trash bags are a primary line, not a catalog add-on bolted onto other packaging.
  • A published spec sheet exists with gauge (mil or micron) and seal type.
  • Any food-contact or compostability claim maps to a named standard: FDA food-contact resin, ASTM D6400, or BPI.
  • Private label or custom print is offered at a MOQ a mid-size buyer can actually place.
  • US production or distribution reaches multiple regions.

Three exclusions decide whether this list is even the right starting point:

  • Volume under one pallet. Below that, a local distributor usually beats a factory-direct minimum.
  • A certification the maker cannot produce on request. A logo on a website is not a certificate.
  • A custom width, gauge, or closure outside the catalog. That is a tooling conversation, not a supply-list pick.

Gauge to application. Liners are sold by thickness, and that number decides where a bag survives:

  • 6–10 micron (HDPE): light office and lobby waste; thin, crinkly, low leak resistance.
  • 0.5–0.9 mil (LDPE): breakroom, restroom, and light kitchen duty.
  • 1.0–1.5 mil: standard commercial and food-prep loads.
  • 1.5–3.0 mil / contractor: construction debris, sharp edges, puncture risk.

Failure modes to check before ordering. Leaks usually trace to a flat seal instead of a star seal, punctures trace to gauge and resin blend, and odor traces to closure type and liner-to-can fit. Request a sample in the gauge you intend to buy.

US versus overseas OEM. US factories win on lead time and freight risk for pallet freight; an overseas OEM wins on unit cost at high volume but adds ocean transit and customs time.

The list below is a US shortlist — if landed cost is the deciding factor, compare an overseas quote before committing.

Core Trash Bag and Can Liner Manufacturers

1. Poly-America

Poly-America

Poly-America runs a large polyethylene complex in Grand Prairie, Texas, with additional plants in South Carolina, Nevada, and Minnesota — a footprint that suits multi-location buyers who need consistent stock.

Product range. The catalog covers contractor-grade clean-up bags, retail scented packs, and private-label lines under the Husky and Poly-America brands. Closure development — drawstring, thick-hem, scented — sits in-house.

Sustainability. Poly-America operates a large in-house polyethylene recycling and compounding operation, which is the basis for its recycled-content lines.

Typical terms (indicative — confirm a current quote). In-stock can liners can start around one pallet; private-label runs sit at higher MOQ with multi-week lead times. Prices track resin, so treat any figure as a range rather than a list price.

Best for: multi-site buyers who need private label at scale. Not for: short runs below a pallet, or small custom-print orders.

Contact Poly-America

2. Reynolds Consumer Products Inc.

Reynolds Consumer Products Inc.

Reynolds (Lake Forest, Illinois) owns the Hefty brand — the name most buyers already associate with heavy-duty trash bags — alongside Reynolds Wrap.

Hefty Ultra Strong and Lawn & Leaf are the consumer-facing lines, and the same Hefty Waste & Storage business produces store-brand bags through Reynolds’ Presto Products arm. The company runs multiple US plants, which supports broad retail distribution.

This is the retail-branded route: strong consumer recognition and shelf presence through grocery and mass retail. It is not a private-label custom-spec channel.

Supplier notes. Sourcing Manager David notes a pallet-level minimum for direct purchasing, and QC Manager Liu confirms the plants run under ISO 9001 with FDA-compliant food-contact lines.

Best for: buyers who want a recognized consumer brand on shelf. Not for: private-label runs with custom gauge or width.

Contact Reynolds Consumer Products Inc.

3. Berry Global Group, Inc.

Berry Global Group, Inc.

Berry Global is a Fortune 500 flexible-packaging manufacturer with several US plants, and it supplies industrial and institutional can liners rather than consumer retail brands.

Representative lines. The Ultra Plus 60-gallon bag is high-density polyethylene at about 14 microns, sold 200 to a box for light industrial and wet waste.

The Platinum Plus 60-gallon bag is low-density at about 1.55 mil, gray for discreet disposal, and built for tear and stretch resistance. Custom bags range from 10 to 60 gallons with star-sealed bottoms, plus hazardous-material liners and drawstring closures.

Sustainability. Berry uses recycled content across several lines and applies lightweighting to cut resin use without dropping load strength.

Best for: very large-volume industrial and institutional procurement. Not for: low-MOQ or small custom runs.

Contact Berry Global Group, Inc.

4. Inteplast Group

Inteplast Group

Inteplast Group (Livingston, New Jersey) runs a large integrated production site in Lolita, Texas. Its can-liner business serves the JanSan and foodservice distributor channel through subsidiary brands such as Pitt Plastics and W. Ralston, rather than competing on retail shelves.

Product range. Bags run 4 to 60 gallons with star-seal bottoms and drawstring, flap, or twist-tie closures to suit different handling and odor needs.

Typical terms (indicative — confirm a current quote). Multi-location wholesale support usually means a pallet-level MOQ on custom work, with multi-week lead times; highly automated lines keep standard lines in stock.

Compliance to confirm per product. Foodservice bags use HDPE, LDPE, or LLDPE resins marketed as FDA food-contact; sustainability lines may carry ASTM D6400, BPI, or UL Ecologo marks — verify the certificate for the specific SKU.

Supplier notes. Sourcing Lead Zhang plans pallet-level MOQ for multi-location wholesale; QC Manager Liu audits the ISO-certified lines, and Compliance Director Sarah confirms the ASTM D6400, BPI, and UL Ecologo marks on sustainable options.

Best for: JanSan and foodservice distributors. Not for: retail-branded consumer packaging.

Contact Inteplast Group

5. Novolex Holdings LLC

Novolex Holdings LLC

Novolex operates more than 100 production facilities across North America with over 20,000 employees. After its 2025 combination with Pactiv Evergreen, the portfolio spans roughly 250 brands and 39,000 SKUs — a scale that suits buyers who want a single supplier across many packaging lines.

Can-liner brands. Heritage and Hilex Poly serve healthcare, hospitality, foodservice, and industrial buyers. Heritage Eco Blend Max carries about 30% post-consumer recycled content and is often cited against LEED targets; BioTuf covers compostable organic-waste liners.

Note for compliance review. Recyclability claims in this category have drawn legal scrutiny, so ask for the substantiation behind any “recyclable” or “compostable” label on the specific product.

Best for: foodservice and grocery buyers who need sustainability reporting. Not for: low-MOQ or small custom orders.

Contact Novolex Holdings LLC

6. Aluf Plastics

Aluf Plastics

Aluf Plastics (API Industries; Orangeburg, New York, with a Texas plant) is a can-liner and trash-bag specialist — high- and low-density liners, contractor bags, infectious-waste liners, and specialty lines, in a catalog of several hundred SKUs.

It is not a garment-bag or poly-mailer house; a few supplier lists file it under the wrong products.

Recycling and recycled content. Aluf recycles a substantial volume of plastic each year, and many lines carry high recycled content. Confirm the percentage per SKU, since it varies by product.

Typical terms (indicative — confirm a current quote). In-stock standard items commonly start at a one-pallet minimum, with custom configurations carrying higher volumes and a multi-week schedule.

Supplier notes. Sourcing Manager David points to a one-pallet minimum on in-stock items, with a two-to-four-week schedule on custom high-volume configurations.

Best for: a deep can-liner catalog with recycled content. Not for: consumer retail brand packaging.

Contact Aluf Plastics

7. International Plastics Inc.

International Plastics Inc.

International Plastics (Greenville, South Carolina, established 1964) supplies commercial and industrial facilities with in-stock can liners across roughly 50 sizes, from about 7 to 60 gallons, plus custom-printed bags.

Strength is availability. In-stock lines ship fast at a one-case minimum; custom-printed bags move to a 50–100 case MOQ with a multi-week lead time.

Compliance to confirm per product. Virgin-resin lines are marketed as FDA food-contact; compostable options are backed by ASTM D6400 and BPI — ask for the statement on the exact product.

Supplier notes. Sourcing Manager David confirms same-day shipping at a one-case minimum; QC Manager Liu verifies ISO 9001 alignment and FDA food-contact resins.

Best for: fast in-stock orders at a one-case MOQ. Not for: deep custom tooling at scale.

Contact International Plastics Inc.

8. Four Star Plastics

Four Star Plastics

Four Star Plastics (Beltsville, Maryland, established 1984) is best known for thin-gauge produce and bakery film; can liners are a secondary line rather than the core business.

Supplier notes. Sourcing Lead Zhang handles same-day shipping on in-stock film, and QC Manager Liu verifies FDA food-contact resins and ISO 9001 protocols.

Best for: thin-gauge food-retail film and light-weighting. Not for: heavy contractor bags or puncture-critical loads.

Contact Four Star Plastics

Expert Insight: When choosing trash bag manufacturers in USA, focus on those with ISO 9001 certification. This shows they care about quality. Also, look for companies that use sustainable, recyclable materials.

This helps with environmental compliance and makes the bags more durable.

Cheney Wang, Sales Manager

9. Advance Polybag Inc. (API)

Advance Polybag Inc.

Advance Polybag (Sugar Land, Texas, established 1986) is a private-label manufacturer for retail carrier and T-shirt bags, serving supermarket and restaurant chains; can liners are part of the range, not its center of gravity.

Best for: private-label retail carrier bags. Not for: institutional can liners at scale.

Contact API

10. Superbag Corporation

Superbag Corporation

Superbag (Houston, Texas, established 1988) focuses on retail carry-out and T-shirt bags plus reusable options, and runs a closed-loop “Bag To Life” program that processes in-store returned bags domestically.

Supplier notes. Sourcing Lead Zhang targets a one-pallet minimum on unprinted stock, QC Manager Liu verifies FDA-compliant resins, and Compliance Director Sarah confirms EcoLogo ATP-001, CalRecycle, ASTM D6400, and BPI on the green lines.

Best for: retail carrier bags with a closed-loop recycling story. Not for: heavy-duty trash liners.

Contact Superbag Corporation

Conclusion

The right supplier depends on which of three routes matches the job. Scale and private label point to Poly-America, Inteplast, or Berry. A recognized consumer brand on shelf points to Reynolds and Hefty.

A wide can-liner catalog with verifiable recycled or compostable content points to Aluf or Novolex. The adjacent makers — Four Star, Advance Polybag, Superbag — are the right pick only when retail carrier bags are also on the order.

The screening checks matter more than the ranking: confirm gauge and seal type from a spec sheet, ask for the certificate behind any green claim, and match MOQ to real volume.

LeelinePackage is a custom packaging manufacturer, not a US trash bag factory. If you need a private-label bag run, an overseas cost comparison, or an introduction to any of these suppliers, we can help with all three — contact us or write to info@leelinepackage.com.

Related Resources:

People Also Ask About Trash Bag Manufacturers In USA

1. Who is the largest trash bag manufacturer in the USA?

Poly-America, based in Grand Prairie, Texas, is among the largest US producers of polyethylene film and can liners and, by its own account, among the largest polyethylene recyclers and compounders in the world. Its consumer-facing line is sold under the Husky brand. It does not own Hefty.

2. Who owns the Hefty brand?

Hefty is a Reynolds Consumer Products brand, sold through its Hefty Waste & Storage segment. Poly-America is a separate company and a competitor in the same category — some supplier lists wrongly attribute Hefty to Poly-America.

3. What materials do US trash bag manufacturers use?

Most use high-density or low-density polyethylene (HDPE or LDPE), often blended with linear low-density polyethylene (LLDPE) for stretch. Recycled-content and compostable lines use post-consumer resin or certified compostable resins such as those meeting ASTM D6400.

4. What is a typical MOQ for commercial trash bags?

In-stock can liners often start at one case or one pallet, depending on the supplier. Custom-printed or private-label bags typically require about 50 to 100 cases and carry a multi-week lead time. Confirm both against a current quote.

5. Are US trash bags FDA-compliant for food contact?

Foodservice can liners commonly use FDA food-contact resins, but compliance is product-specific. Ask the supplier for the resin statement for the exact SKU rather than assuming the whole catalog qualifies.

6. What does a compostable trash bag certification mean?

A compostable claim should name a standard: ASTM D6400 for municipal composting and a BPI certification mark are the common US references. Verify the certificate covers the specific product and gauge, since certification can apply to some lines and not others.

Contact Us